Club Delphi  
    FTP   CCD     Buscar   Trucos   Trabajo   Foros

Retroceder   Foros Club Delphi > Otros entornos y lenguajes > ASM y Microcontroladores
Registrarse FAQ Miembros Calendario Guía de estilo Buscar Temas de Hoy Marcar Foros Como Leídos

Respuesta
 
Herramientas Buscar en Tema Desplegado
  #1  
Antiguo 09-01-2010
Avatar de rretamar
[rretamar] rretamar is offline
Miembro Premium
 
Registrado: ago 2006
Ubicación: San Francisco, Córdoba, Argentina
Posts: 1.168
Poder: 20
rretamar Va camino a la famarretamar Va camino a la fama
Usando un RTC desde Mikropascal

Un mensaje que subí hace tiempo al foro de Mikropascal, donde se muestra cómo usar un chip reloj-calendario (RTC) con un microcontrolador PIC, y adjunto el código fuente en Pascal que escribí. Espero que le sirva a alguien.

Saludos !

----------------------------------------------------------

Schmatic:



HT1380 Descripcion and datasheet:

http://www.holtek.com.tw/english/doc...mer/1380_1.htm

Code for ht1380.ppas unit:

Código Delphi [-]

(*

  Unit for access to Real Time Clock (RTC) Holtek HT1380 or HT 1381
  Compiler: Mikropascal 7
  Access mode: byte-to-byte (see chip datasheet)

  2007 Ramon Domingo Retamar
  http://www.hrservicios.com.ar
  Email: ramonretamar [a] gmail.com
  Argentina, South America

  Pin connection PIC18F452 <---> HT1380 (see schematic example)

  RE0 (pin 8)  ---->  SCLK (pin 7)
  RE1 (pin 9)  <--->  I/O (Data) (pin 6)
  RE2 (pin 10) ----> /REST (pin 5)

See example schematic (png format)  here:

http://i17.tinypic.com/3588h1w.png

Procedures and function for low-level access
--------------------------------------------

// Copy n bits between variables (or registers)
Function Copy_bits(Source, Start, Bits_to_copy: Byte): Byte;

// Convert A byte variable to string (2 digits with pad-left-zeros)
Procedure ByteToStr_2(Number: Byte ; Var Destination: String[2]);

// Send pulse to SLCK line (RE0)
Procedure SCLK_Pulse;

 // Send one byte to RTC (LSB first)
Procedure Send_Byte(Value: Byte);

// Send Command and Data (2 bytes)
Procedure Send_Command_and_Data(Command, Data: Byte);

// Send Command byte and read Data byte
Function Read_Data(Command: Byte): Byte;


Procedures and functions for high-level access
----------------------------------------------

 // Set chip flags on first power-on
Procedure Initialize_RTC;

// Get seconds from RTC
Function Get_Seconds: Byte;

// Get minutes from RTC
Function Get_Minutes: Byte;

// Get hours from RTC
Function Get_Hours: Byte;

// Get days from RTC (1..31)
Function Get_Day: Byte;

// Get month from RTC (1..12)
Function Get_Month: Byte;

// Get day of week from RTC (1..7)
Function Get_Day_Of_Week: Byte;

// Get year (0..99)
Function Get_Year: Byte;

// Return time from RTC as string (format is hh:mm:ss)
Procedure Get_Time(Var TimeString: String[8]);

// Return date from RTC as string (format is dd/mm/yy)
Procedure Get_Date(Var DateString: String[8]);

// Set time to RTC
Procedure Set_Time(Hour, Min, Sec: Byte);

// Set date to RTC
Procedure Set_Date(Day, Month, Year: Byte);

// Check if RTC is blank on first power on (test Year register)
Function RTC_Not_Set: Byte;

// Set date/time registers in read-only mode
Procedure Rtc_Write_Protect;

// Enable date/time registers write
Procedure Rtc_Write_Enable;

*)
Unit HT1380;

Implementation

Var
  BitNum: Byte;     // Used for test individual bits on Command bytes and Data bytes

Const               // Day names
  DaysNames: Array [1..7] Of String[3] =('Sat','Sun','Mon','Tue','Wed','Thu','Fri');

//
// Procedures and function for low-level read/write RTC chip
//

// Copy n bits between variables (or registers)
Function Copy_bits(Source, Start, Bits_to_copy: Byte): Byte;
Begin
  Result:=0;                                // Set all bits to zero
  For BitNum:=Start To Bits_to_copy - 1 Do  // Copy from Start position
    Result.BitNum := Source.BitNum;
End;

// Send pulse to SLCK line (RE0)
Procedure SCLK_Pulse;
Begin
  ClearBit(PORTE,0);   // Set SCLK to low state
  SetBit(PORTE,0);     // Set SCLK to high state (rising edge)
  Delay_10us;          // Keep high state for 10 microseconds
  ClearBit(PORTE,0);   // Set SCLK to low state (rising fall)
  Delay_10us;          // Keep low state for 10 microseconds
End;

 // Send one byte to RTC (LSB first)
Procedure Send_Byte(Value: Byte);
Begin
  ClearBit(TRISE,1);            // Set RE1 (I/O line) as output
  For BitNum:=0 To 7 Do         // Start on LSB bit
    Begin
      If Value.BitNum = 1 Then  // Check individual bits
        SetBit(PORTE,1)
      Else
        ClearBit(PORTE,1);      // Set RE1 (I/O line) state
      SCLK_Pulse;               // Sent pulse on RE0 (SCLK)
    End;
End;

// Send Command and Data (2 bytes)
Procedure Send_Command_and_Data(Command, Data: Byte);
Begin
  ClearBit(PORTE,0);    // Set SCLK to low state
  SetBit(PORTE,2);      // Set /REST line to high state (init of read-cycle)
  Send_Byte(Command);   // Send command byte (LSB first)
  Send_Byte(Data);      // Send Data byte (LSB first)
  ClearBit(PORTE,2);    // Set /REST to low state (end of write-cycle)
End;

// Send Command byte and read Data byte
Function Read_Data(Command: Byte): Byte;
Begin
  ClearBit(PORTE,0);      // Set SCLK (RE0) to low state
  SetBit(PORTE,2);        // Set /REST (RE2) to high state (init of read-cycle)
  Send_Byte(Command);     // Send Command byte
  SetBit(TRISE,1);        // Set RE1 (I/O line) as input
  For BitNum:=0 To 7 Do   // Read data bits in I/O line (LSB first)
    Begin
      If TestBit(PORTE,1) = 1 Then
        Result.BitNum := 1
      Else
         Result.BitNum := 0;
      SCLK_Pulse;           // Send pulse on SCLK
    End;
  ClearBit(PORTE,2);        // Set /REST to low state (end of read-cycle)
End;

//
//  High-level functions and procedures for read and write date/time on RTC
//
// Get seconds from RTC
Function Get_Seconds: Byte;
Begin
  // Read address 000 (bits 0 to 6 as bcd format)
  Get_Seconds:=Bcd2Dec( Copy_Bits(Read_Data($81), 0, 7));
End;

// Get minutes from RTC
Function Get_Minutes: Byte;
Begin
  // Read Address 001  (bits 0 to 6 as bcd format)
  Get_Minutes:= Bcd2Dec( Copy_Bits(Read_Data($83), 0, 7));
End;

// Get hours from RTC
Function Get_Hours: Byte;
Begin
  // Read Address 002  (bits 0 to 4 as bcd format)
  Get_Hours:= Bcd2Dec( Copy_Bits(Read_Data($85), 0, 5));
End;

// Get days from RTC (1..31)
Function Get_Day: Byte;
Begin
  // Read Address 003  (bits 0 to 5 as bcd format)
  Get_Day:= Bcd2Dec( Copy_Bits(Read_Data($87), 0, 6));
End;

// Get month from RTC (1..12)
Function Get_Month: Byte;
Begin
  // Read Address 004  (bits 0 to 4 as bcd format)
  Get_Month:= Bcd2Dec( Copy_bits( Read_Data($89) ,0,5));
End;

// Get day of week from RTC (1..7)
Function Get_Day_Of_Week: Byte;
Begin
  // Read Address 005  (bits 0 to 3 as bcd format)
  Get_Day_Of_Week:= Bcd2Dec( Copy_bits( Read_Data($8B) ,0,4));
End;

// Get year (0..99)
Function Get_Year: Byte;
Begin
  // Read Address 006 (bits 0 to 7 in bcd format)
  Get_Year:= Bcd2Dec( Read_Data($8D));
End;

// Convert A byte variable to string (2 digits with pad-left-zeros)
Procedure ByteToStr_2(Number: Byte ; Var Destination: String[2]);
Var
  TmpString: String[3];  // User for Number-to-string conversion
Begin
  ByteToStr(Number, TmpString);       // Convert Number to string (3 digits)
  For BitNum:=0 To 2 Do               // Replace spaces with zeros
    If TmpString[BitNum]=' ' Then
      TmpString[BitNum]:='0';
  Destination:='  ';                  // Initialize destination
  For BitNum:=1 To 2 Do               // Copy last two digits
    Destination[BitNum - 1]:= TmpString[BitNum];
End;


// Return time from RTC as string (format is hh:mm:ss)
Procedure Get_Time(Var TimeString: String[8]);
Var
  Hour, Minute, Second: String[2];
  segundos: string[3];
Begin
  TimeString:='';
  ByteToStr_2(Get_Hours, Hour);    // Get values and copnvert to string
  ByteToStr_2(Get_Minutes, Minute);
  ByteToStr_2(Get_Seconds, Second);
  StrCat(TimeString,Hour);         // Create time-string
  StrCat(TimeString,':');
  StrCat(TimeString,Minute);
  StrCat(TimeString,':');
  StrCat(TimeString,Second);
End;


// Return date from RTC as string (format is dd/mm/yy)
Procedure Get_Date(Var DateString: String[8]);
Var
  Year, Month, Day: String[2];
Begin
  DateString:='';
  ByteToStr_2(Get_Year, Year);    // Get values and copnvert to string
  ByteToStr_2(Get_Month, Month);
  ByteToStr_2(Get_Day, Day);
  StrCat(DateString,Day);         // Create date-string
  StrCat(DateString,'/');
  StrCat(DateString,Month);
  StrCat(DateString,'/');
  StrCat(DateString,Year);
End;

// Set time to RTC
Procedure Set_Time(Hour, Min, Sec: Byte);
Begin
  // Send values in bcd format
  Send_Command_and_Data($80, Dec2Bcd(Sec));   // Send seconds (and set CS flag to 0)
  Send_Command_and_Data($82, Dec2Bcd(Min));   // Send minutes
  Send_Command_and_Data($84, Dec2Bcd(Hour));  // Send hour (24 Hour mode)
End;

// Set date to RTC
Procedure Set_Date(Day, Month, Year: Byte);
Begin
  // Send values in bcd format
  Send_Command_and_Data($86, Dec2Bcd(Day));   // Send Day (1..31)
  Send_Command_and_Data($88, Dec2BCD(Month)); // Send Month (1..12)
  Send_Command_and_Data($8C, Dec2BCD(Year));  // Send Year (0..99)
End;
 
// Check if RTC is blank (using Year register)
Function RTC_Not_Set: Byte;
Begin
  If Get_Year = 00 Then // Check for initial date
    Result:=1
  Else
    Result:=0;
End;

// Set date/tme registers in read-only mode
Procedure Rtc_Write_Protect;
Begin
  // Set WP flag to high
  Send_Command_and_Data($8E,$40);
End;

// Enable date/time registers write
Procedure Rtc_Write_Enable;
Begin
  // Set WP flah to low
  Send_Command_and_Data($8E,$00);
End;

 // Set chip flags on first power-on.
Procedure Initialize_RTC;
Begin
  // Set WP flag to 0 (enable all registers write)
  Send_Command_and_Data($8E,$00);
  // Set CH flag to 0 (enable crystal oscillator on pins 2 and 3)
  Send_Command_and_Data($80,$00);
  // Wait 3 seconds while crystal oscillator become stable
  Delay_ms(3000);
End;

End.
__________________
Lazarus Codetyphon : Desarrollo de aplicaciones Object Pascal, libre y multiplataforma.
Responder Con Cita
  #2  
Antiguo 19-01-2010
Avatar de fenixariel
fenixariel fenixariel is offline
Miembro
 
Registrado: mar 2007
Posts: 77
Poder: 18
fenixariel Va por buen camino
Hola rretamar, interesante tu programa.

seria bueno poder colgar algunos topicos que en algun momento seguro nos hicieron patalear, no se algunas cosas (la idea es que quien las lea las estudie y las aprenda y no simplemente las copie y no tenga idea como funciona el asunto) con RF, IR, nose control de fase de carga en alterna, bueno nose solo mensione algunos de los mas buscados.......

Creo que MikroElectronica esta de moda, es mas no creo tenga competidores...........
Responder Con Cita
  #3  
Antiguo 19-01-2010
Avatar de Neftali [Germán.Estévez]
Neftali [Germán.Estévez] Neftali [Germán.Estévez] is offline
[becario]
 
Registrado: jul 2004
Ubicación: Barcelona - España
Posts: 18.233
Poder: 10
Neftali [Germán.Estévez] Es un diamante en brutoNeftali [Germán.Estévez] Es un diamante en brutoNeftali [Germán.Estévez] Es un diamante en bruto
¡¡Qué recuerdos me trae ese gráfico!!
__________________
Germán Estévez => Web/Blog
Guía de estilo, Guía alternativa
Utiliza TAG's en tus mensajes.
Contactar con el Clubdelphi

P.D: Más tiempo dedicado a la pregunta=Mejores respuestas.
Responder Con Cita
  #4  
Antiguo 02-02-2010
Avatar de fenixariel
fenixariel fenixariel is offline
Miembro
 
Registrado: mar 2007
Posts: 77
Poder: 18
fenixariel Va por buen camino
Hace unos meses un amigo me paso la serie completa en CDs, eran 11 me pase 4 meses viendolos una y otra vez.............
Responder Con Cita
Respuesta


Herramientas Buscar en Tema
Buscar en Tema:

Búsqueda Avanzada
Desplegado

Normas de Publicación
no Puedes crear nuevos temas
no Puedes responder a temas
no Puedes adjuntar archivos
no Puedes editar tus mensajes

El código vB está habilitado
Las caritas están habilitado
Código [IMG] está habilitado
Código HTML está deshabilitado
Saltar a Foro

Temas Similares
Tema Autor Foro Respuestas Último mensaje
Como usar un solo pin con mikropascal ? gaston260 ASM y Microcontroladores 4 05-01-2010 02:07:40
Presentando a Mikropascal rretamar ASM y Microcontroladores 31 30-12-2009 04:31:48
No solo de Mikropascal vive Delphi sino tambien de MikroC y MikroBasic! fenixariel ASM y Microcontroladores 4 11-02-2009 23:33:18
como abrir un archivo .hlp desde mi aplicacion usando un menu federiconqn21 Varios 2 20-05-2008 13:02:37
Usando OpenOffice AzidRain La Taberna 9 30-07-2007 20:11:53


La franja horaria es GMT +2. Ahora son las 14:03:44.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Traducción al castellano por el equipo de moderadores del Club Delphi
Copyright 1996-2007 Club Delphi